Top 10 Saving Tips
Listed Below Are A Few Ways To Start Seeing Changes In Your Bill Today.[/et_pb_text][et_pb_divider admin_label=”Divider” color=”#ffdd00″ show_divider=”on” height=”5″ /][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left”]
- Control the hours you run your pool pump:
- Summer – 6 hours a day
- Winter – 4 hours a day
- Cool your home at 78 degrees or warmer with the thermostat fan switched to auto. For additional savings, raise your thermostat to 82 degrees or warmer when you’re away.
- Heat your home at 68 degrees or cooler with the thermostat fan switched to auto. To save even more, lower your thermostat to 65 degrees or cooler at night or when you’re away from home.
- Lower your water heater temperature from 140 degrees to 120 degrees, which is the recommended temperature setting according to the U.S. Department of Energy, to save about $2 a month.
- Clean or replace the A/C filter regularly to help your unit run more efficiently and trim cooling costs.
- Turn off your ceiling fan when you leave the room. A fan that runs all the time costs up to $7 a month.
- Replace old, high-flow showerheads with water-efficient showerheads and save up to $80* a year.
- Adjust the water level on your washing machine to match the load size, especially when using hot water. Always use a cold rinse.
- Clean the lint filter in your dryer before every load to dry your clothes faster.
- Use the auto sensor function on your dryer to conserve energy by not over-drying your clothes.
**Don’t Forget To Implement These Tips In Your Daily Lives To Help Conserve Your Energy And The Environment. It All Adds Up To Cleaner Air
Schedule Your Limited Time Free Energy Efficiency Analysis[contact-form-7 id=”21″ title=”Contact form 1″] [/et_pb_text][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left”]
Try ShowerHead Test Today
Determine If Your ShowerHead Is Water Efficient in under 5 Minutes.[/et_pb_text][et_pb_divider admin_label=”Divider” color=”#1e73be” show_divider=”on” height=”5″ /][et_pb_text admin_label=”test details” background_layout=”light” text_orientation=”left”]Follow These Few Easy Steps
- Get a bucket and a watch/clock that counts seconds.
- Place the bucket underneath the showerhead.
- Turn the shower on all the way using cold water.
- Time how long it takes for one gallon of water to fall into the bucket.
Check Your Timing
- Less than 24 seconds to fill a gallon of water, then you do not have the most efficient showerhead because its flow exceeds the recommended 2.5 gallons per minute.
- More than 24 seconds to fill a gallon of water, then you have an efficient showerhead.